Declaration of Conformity(環境符合性聲明)
Dear Partner,
FOCMCU's hereby declares that all our lead free products satisfy the following requirements/conditions:
1) Using an “R” after the package type designating letter in the IS prefix or FH prefix part number for identification respectively.
2) Complying with the RoHS (EU Directive entitled“Restriction on the use of certain Hazardous Substances 2011/65/EU and 2015/863”) requirements and containing none of the following 12 substances: Pb, Hg, Cd, Cr(VI), PBBs, PBDEs(include Deca-BDE), DEHP,BBP,DBP,DIBP, PFOA and PFOS.
3) Complying with the IPC/JEDEC J-STD-020D with regard to the solder profile requirement(Max. reflow temperature 260 deg.C )
4) Complying with the 233 SVHC (Substance of Very High concern ) of EU directive of the Regulation(EC) No 1907/2006 (REACH): the part shall not contain more than the 0.1% of the following SVHC by weight of part as defined in appendix,and meet the requirements of REACH Annex XIV and Annex XVII.
5) Complying with IEC 61249-2-21,JPCA-ES01 2003& IPC 4101,the Br,Cl,must be lower than 900 ppm, respectively,and total amount of PPM must be lower than 1500 ppm (Br+Cl<1500pm).
6) To declare Giantec were not use the materials from mines with inferior working conditions, such as DRC (Democratic Republic of the Congo).The suppliers or subcontractors will be trace the supply chain for gold (Au),tantalum (Ta),tungsten (W),tin(Sn)and cobalt(Co).
7) Complying with the Stockholm Convention on Persistent Organic Pollutants norms, and confirm that our products don't contain the Stockholm Convention on Persistent Organic Pollutants provisions chemicals.
This Declaration is made with FOCMCU's best commercial effort to verify the compliance, of its suppliers, with the above requirement, and is given in good faith without any responsibility or liability. The statement here above does not extend to or apply to the procedures subject to unintentional contamination, misuse, neglect, accident, improper installation or any use in violation of instructions furnished by FOCMCU's.
This Declaration contains the entire understanding between you and FOCMCU's with respect to this subject matter and supersedes all prior agreements, understandings and/or representations.
Please let us know if there is any further concern.
Sincerely Yours,
Tommy Lo
Quality & Reliability Assurance
FOCMCU Electronics Corporation